Solution Precursor Plasma Spray (SPPS) technique is an emergent technique which offers significant performance advantages with various functional coatings like YSZ, ZnFe2O4, LSM, metal-doped ZnO, etc. Apart from the above capabilities, efforts towards development of an innovative hybrid approach through simultaneous deposition of powder and solution resulted in coatings with unique microstructu...

The residual porosity is an unavoidable phenomenon of the components produced by powder metallurgy process which in turn largely affects the strength property of the same. Now a day it is possible to control porosity of powder metallurgy components and retain them to desired amount when required. The porosity of a powder metallurgy component is greatly depends on the sintering temperature. In t...

In this paper an attempt has been made to correlate the usefulness of electrodes made through powder metallurgy (PM) in comparison with conventional copper electrode during electric discharge machining. Experimental results are presented on electric discharge machining of AISI D2 steel in kerosene with copper tungsten (30% Cu and 70% W) tool electrode made through powder metallurgy (PM) techniq...

Light weight materials coupled to the need for cost-effective processing have combined to create a significant opportunity for aluminium powder metallurgy as its increasing interest. Aluminium alloy (AA 2219) metal matrix composite reinforced with multi walled carbon nanotube (MWCNT) produced by powder metallurgy (P/M) technique was analysed and CNTs dispersion were traced. The micro hardness a...

The physical and mechanical properties of samples of a nickel-base alloy fabricated by powder metallurgy were determined. The particle sizes of the powders used to make the samples varied from -80/ +200 mesh to -325 mesh. The compaction pressure varied from 138 to 414 MN/m2 and the sintering temperature varied from 1150 to 1250 degrees C. The shrinkage during processing, the porosity, tensile s...

Aluminium (Al)/Aluminium alloy composites are emerging as very promising materials, especially in the fields of aerospace and automotive for their various attractive and technically demanding properties. Discontinuously reinforced aluminium metal matrix composites with reinforcements as nanoparticles of ceramics in general and carbon nanotubes in particular have emerged as the forerunner for a ...

In recent years, the rolling densification process has become increasingly widely used to strengthen powder metallurgy parts. The original composition of the rolled powder metallurgy blank has a significant effect on the rolling densification technology. The present work investigated the effects of different carbon contents (0 wt. %, 0.2 wt. %, 0.45 wt. %, and 0.8 wt. %) on the rolling densific...